Homepage Help
Help Tutoring Jobs

engineering lessons at home for elementary school levels

2 236 engineering level tutors and teachers

Our selection of private engineering tutors and teachers

Montréal
$20/h
Gunes
1st lesson is free!

I am giving math and physics classes for engineering students and giving industrial engineering classes for industrial engineering students.

I approach the subject in comprehensible and detailed way so that students can understand fully. While giving lesson, I give more importance to points which can be asked in the exam. Therefore, students get more benefits, it becomes more efficient in this way.

Brampton
$16/h
Bijay bahadur
(1 review)
1st lesson is free!

Only engineer can help students become engineering graduate with good engineering knowledge

what my students used to like about my teaching was dividing big complex topics into smaller easier components and relate them to topics studied in previous semesters or high school. In my view studying by making comparison or relation to previous related topics gives you better visualization of the topic rather than just going through it superficially.

Montréal
$15/h
Neeraj
1st lesson is free!

Experienced Graduate Mechanical Engineer gives tutor for Engineering, Mathematics and Physics courses

To make understand the basic concepts is been always my first aim while teaching others. Once the concepts are clear, I take several tricky examples to twist and turn the concepts learnt. And the last but not least comes the practice examples.

Kingston
$50/h
Brian
1st lesson is free!

University adjunct professor in engineering offering tutoring in math, physics, engineering, and computer programming.

I've been teaching engineering as a teaching assistant and adjunct university professor for over 10 years. I pride myself on my enthusiasm, patience, and ability to teach topics to students with various levels of understanding.

London
$20/h
Tehreem
1st lesson is free!

Engineering Graduate Student gives Lessons for Electrical Engineering Undergrad Students in London, Ontario

I like to teach in an orderly manner with well planned lessons' content as well as its progression. A typical class with me would involve lecture slides(if the job is not at short notice and I get time for that), a lot of writing on the board/notebook and thorough explanation.

Ottawa
$18/h
Arpana
1st lesson is free!

Master's student gives EECE domain classes for high school and undergraduate students in Ottawa

I believe that any discipline of technical studies can be understood with ease by following a specific method that is unique and subject to the course outline. I am fairly adept at following the molecule methodology, as I would like to call it, wherein I aid the student in analyzing what the course is about, what is the expected outcome and what is to be known by the end of the course.

Winnipeg
$16/h
Dilpreet
1st lesson is free!

Electronics Engineer in Winnipeg teaches various programming languages (HTML, C, C++ etc ), electronics and robotics.

I teach by giving the real-life examples. I also give practical problems and situations, where students can apply their learnings. Other than lectures (in person/ on webcam), programming demonstrations (on IDEs and on web hosting sites for coding and debugging), discussions and quizzes are conducted.

Calgary
$25/h
Artur
1st lesson is free!

Doctor in Electrical Engineering gives lessons in Linear Circuits Theory and its applications

My methodology is to know each student's need, e.g. what subject is to be learnt; what is the required level; what is the time-frame. Then, I outline the schedule, breaking it down to the lessons.

Montréal
$25/h
Jordan roneold
(1 review)
1st lesson is free!

Mechanical engineering graduate in montreal looking to help students understand engineering material

My teaching method is simple, lets say we study calculus - I prepare tutoring notes explaining the theory -Then we solve practice questions to help understand the theory -Then the student ask questions and we go over questions they have encountered and had difficulties with

Windsor
$15/h
Arvinder pal singh
1st lesson is free!

Masters in Electronics & Communication Engineering with 6 years of University experience is available to teach all engineering subjects.

My methodology / approach / teaching pattern / frequency will be decided by the students. Let it be videos, websites, presentations, lectures or discussions. Choose your pedagogy and you will get it. Assistance and homework will be part of the plan.

Thunder Bay
$18/h
Sree ranga harsha vardhan
1st lesson is free!

Teaching from Grad student with a practical approach to mechanical engineering concepts

I try as much as possible to give practical exposure to theoretical concepts. I will provide strong examples to support the lectures. I don't shy away from clarifying your doubts and questions in my talk. I am open to tutoring students from any background.

Calgary
$35/h
Clara
1st lesson is free!

Pass the FE Exam "Other disciplines" with lessons in English or Spanish!

An effective, enjoyable and productive learning experience. Reduce time and effort. Customized explanations according to learning styles and detailed exercises to succeed on the FE exam. "When there is a goal, there is a road", just let me know yours and we will get there! Una experiencia de aprendizaje efectiva, divertida y productiva. Reduce el tiempo y el esfuerzo.

Edmonton
$18/h
Gurvinder
1st lesson is free!

Hello.. i am having M.tech (ME) and 5 years experience in teaching.

i believe to start the subjects from basic. So that student never miss any point. I like to be fa miler with student to understand their problems . My way of delivering lecture is simple and understandable to students.

Calgary
$40/h
Srini
1st lesson is free!

Oil and Gas Professional passionate in teaching Mechanical Engineering, Codes and Standards

I like to conduct workshop sessions, webinars, class room lectures using visual aids and prefer mostly interactive. I enjoy always question and answer sessions. I have taught classes of size 45 maximum. I have given special subject talks to 240 public members.

Saskatoon
$18/h
Risha
1st lesson is free!

Assistant Professor motivates students to play with MATH and PHYSICS in SASKATOON

My teaching methods are highly interactive discussion based which make student comfortable to clear their doubts and understandable about basic concepts.

Vancouver
$25/h
Robin
1st lesson is free!

Graduated civil engineer gives engineering tutorials in Vancouver. UBC Courses: PHYS 100, 170 and CIVL 230, 231)

I invoke curiosity on students; curiosity is a tool that can be applied and managed in each individual differently and use it on personal growth. I challenge students by trying to make them become decision-makers.

Ottawa
$19/h
Mike
1st lesson is free!

Aerospace Engineering master's student in Ottawa, ON, gives engineering dynamics, calculus and computing classes in c++ and java

Most engineering classes can only be reliably learned by working through problems and encountering challenges before they show up on an exam paper (especially in a course like dynamics). This is what I do with students. Typically, I will ask a student to start a problem on their own so that I can observe how they approach a problem, and give guidance and tips where I can see room for improvement.

Windsor
$18/h
Priyanka
1st lesson is free!

Engineering students gives electronics and math classes for high school students in Windsor On

I always remain flexible with the schedule of the student. I always use Pen and paper method as well as board and marker method to teach them but I am comfortable with online teaching too. I always try to give the examples to understand the concept never do spoon feeding.

Edmonton
$25/h
Jayranjan omranjan
1st lesson is free!

Beauty of M.E lies in it's concepts.We make you understand it better.

Well, I believe if base or roots of concepts are clear, advance routes can easily be treaded. I emphasise on moving from the base to the top of the concept as an approach to solve any question.

Winnipeg
$10/h
Michael
1st lesson is free!

University of Manitoba Mechanical Engineer student who can teach mathematics, physics, and sciences in Winnipeg.

My teaching methods is how I taught myself through high school and still how I learn in university. The best way is the understand equations you are using and the types of questions you will be asked, because when you understand the basics you can apply that knowledge to any type of problem on a test.

Pickering
$11/h
Siddhesh
1st lesson is free!

Engineer who gives math and physics classes for high school students in Toronto

I am new to teaching, but in my university I used to teach my fellow batch-mates when in doubt. I used to hold doubt solving session for Strength of Materials course. I have a upper hand in Engineering drawing. I know lot of software used in the industry now-a-days.

Montréal
$15/h
Arun
1st lesson is free!

Aerospace Engineering student gives Math, Physics as well as Flight theory for students in Montreal.

My teaching method will be Lecture method, Discussion method as well as Demonstration method. I base my classes on the weekend. I approach a subject with structure/flexibility.

Toronto
$16/h
Chavali
1st lesson is free!

Engineering student gives engineering classes for engineering students in Toronto and nearby

I can teach for undergraduate and children from 1 to 9th standard students

Ottawa
$18/h
Brittanny
1st lesson is free!

Mature engineering student who tutors math and physics in Ottawa to first and second year students

Due to my incredible organization, I have each course divided into sections to help pinpoint course issues, as well as old midterms and exams.

Winnipeg
$20/h
Vinay
1st lesson is free!

Help me show you simple and creative approach to succeed in engineering

My teaching methods is customised for each individual as I believe nothing works for everyone, you have to personalize it.

Windsor
$10/h
Raja
1st lesson is free!

Engineering students know how and where Math and Physics works together and their practical applications.

I want to focuse in both theoretical and applied knowledge of physics and Mathematics. Moreover I shall encourage students to do research on these subjects and go beyond their mere syllabus.

Burnaby
$18/h
Farheenjahan
1st lesson is free!

Engineering students share their knowledge and tutor to high school students.

My teaching methodology is to first clear the basic concept and be flexible and positive approach in solving the problems

Calgary
$80/h
Ramez
1st lesson is free!

Structural engineer with over 20 years experience teaches structural analysis in Calgary.

Teaching through giving basics of topic and solving example problems to apply learned principles. Can provide help in solving assignments.

Vancouver
$25/h
Moneek
1st lesson is free!

Practising Civil (Structural) Engineer giving Civil Engineering, Maths, and Physics classes for students of all levels

My teaching methods are very detailed and focus more on clearing the underlying concept rather than just providing a solution to a problem.

Brampton
$15/h
Pinak
1st lesson is free!

Master of Industrial engineering with 2.5 years of tutoring experience and Robotics projects experience giving classes for all the grades in Brampton/ Mississauga!

For my teaching, I cannot specify one method for all age groups since it depends on the person to person , but mostly I don't just teach from books I like to make education more of a fun to learn !

Effective,
Affordable, Tailored

Learn with confidence

1
Find
your ideal private tutor on our accredited, evaluated and passionate tutoring database.
2
Book
your lesson today. Tutors answer within the day.
Freely
The 1st lesson is free. You work directly at the best rate without any intermediaries.

Browse all of our available engineering lessons for elementary school level

Thousands of experienced teachers and pedagogues can help you learn,
find available private lessons close to you (level: Elementary School / subject: Academic tutoring).

By Province

By country

Be taught by the best tutors and teachers
in